wtorek, 14 stycznia 2020

Offshore rope access

Maintenance, revision and assembly work on offshore wind turbines and transformers will also pose new challenges for people and materials in 2020. Conventional access methods often fail to achieve the desired goal. Rigid structures such as scaffolding are always exposed to the environment without protection. Industrial climbers can ensure the functionality and corrosion protection of the systems. The personnel assignments of the height workers enable a particularly flexible and cost-effective way of working.

The term offshore describes industrial plants such as wind farms, oil platforms or ships that are not onshore (on the mainland). Industrial climbers can be used wherever access is not possible without technical means.

When it comes to personnel deployment on wind turbines, for example, industrial climbers are flexible and efficient specialists for the maintenance or revision of rotor blades or hubs.

The wear of the rotor blade and other important elements of wind turbines, which is favored by wind and weather, requires effective corrosion protection in order to maintain the safety and functionality of the technology. By climbing the rope, all necessary corrosion protection treatment work can be carried out, guaranteeing protection for up to 25 years.


Industrial climber wind turbines


In addition to climbing for maintenance, repair and corrosion protection reasons, industrial climbers are also used in the field of wind turbines in the area of ​​height rescue. This is so important because there are usually only two service technicians on the system in the normal operating phase. In the event of an accident, only industrial climbers with training in height rescue are able to rescue people from hard-to-reach parts of the wind turbines, such as the rotor blades.

The requirements for working at heights in the field of wind energy generation on the open sea are many times more complex than onshore projects. These jobs require professional training based on national and international standards.

piątek, 10 stycznia 2020

Rope access technology - history and current methods

The term rope access and positioning technology (in short: SZP) has become known under various names such as industrial climbing, working at heights or climbing facades. The term rope access has established itself internationally. All of these terms are one and the same: it is a job positioning that is achieved with the help of at least one scheduled work rope and the additional use of a second, unloaded safety rope. The development of rope access technology dates back to the 1930s. When building the Golden Gate Bridge, rope protection was used for the first time as a means of securing against falling.

The use of rope access technology has become a solid alternative to conventional access methods such as aerial work platforms or facade scaffolding in recent years. The reasons for this lie both in the fast and flexible usability of the industrial climbers and in the cost savings for the client. Rental and installation costs for conventional access aids are eliminated, restrictions for the environment caused by scaffolding or lifting platforms can be avoided, and coordination with an additional supplier is eliminated.

Typical work and locations for workers at heights are inspection, repairs and cleaning of wind turbines, facades, towers, silos and production and storage halls.

Industrial climbers work using the rope access and positioning technology. The basis for this is a redundant system, which consists of two ropes, one speaks here of the support rope (support system) and the safety rope (safety system). The support rope is permanently loaded by the positioning activity of the fitter. The safety rope is permanently unloaded and acts as redundancy in the event of a failing suspension rope.
Work at height


Commercial height workers learn rope access technology in specialist training courses. These are divided into multi-level qualification levels and generally last 5 days per level including a final exam in theory and practice. Further information can be found, for example, at:


The equipment used by the industrial climbers consists of standardized individual components that must be checked annually by a specialist and listed in writing in a test report.

Before the actual execution of the work begins, preparatory work has to be done. The supervising height worker is responsible for safety on the construction site. After inspecting the workplace, he creates an object-related risk assessment. The site-specific hazards are listed here. These can be dangers from access, dangers from work itself or dangers from the environment. After appropriate measures to avoid the dangers have been developed and defined, the object-related operating instructions are drawn up. Basic instructions for the fitters are listed here, starting with the access routes to the site, the selection of the attachment points, up to the planning of the escape route and what to do in an emergency.