Industrial climbing - rope access - offshore
poniedziałek, 27 kwietnia 2020
Rope work or access and positioning by ropes
Access and positioning techniques using ropes, also called rope work or roped work, are subject to a prohibition in principle, subject to exceptions provided for in the Labor Code. They can only be used in certain very specific situations, especially when it is impossible to resort to the use of equipment providing collective protection.
Rules specify that "it is forbidden to use access and positioning techniques using ropes to constitute a work station. However, in the event of technical impossibility of using equipment ensuring the collective protection of workers or when the risk assessment establishes that the installation or implementation of such equipment is likely to expose workers to risk greater than that resulting from the use of access or positioning techniques using ropes, these can be used for temporary work at height .
piątek, 13 marca 2020
Advantages of monitoring your wind turbine
More benefits through maintenance
The prediction of failures through continuous monitoring of the structure and components of the wind turbine is the most effective type of maintenance and guarantees high savings.Reduction of risks during operation
By early detection of damage, dangerous design errors in critical systems can be avoided, thereby reducing intervention times and repair costs.Validation of the construction
With regard to exponential growth in the area of wind farms, monitoring the components of wind turbines during construction can be a valuable tool for validating new methods and materials.More benefits through maintenance
The prediction of failures through continuous monitoring of the structure and components of the wind turbine is the most effective type of maintenance and guarantees high savings.Reduction of risks during operation
By early detection of damage, dangerous design errors in critical systems can be avoided, thereby reducing intervention times and repair costs.Validation of the construction
With regard to exponential growth in the area of wind farms, monitoring the components of wind turbines during construction can be a valuable tool for validating new methods and materials.wtorek, 18 lutego 2020
Dangers when working at heights
Whether as a roofer, in the construction industry or when cleaning facades - where people work at heights, they are at particular risk. Crashes represent the greatest danger. In addition to the sometimes dramatic consequences for those affected, accidents due to downtime can also have negative consequences for the company. The interest of everyone involved in minimizing risks for work at height is therefore great.
Facade lifts or aerial work platforms are often used for work on external facades. Various work can be carried out quickly and without the risk of falling. However, the use of such devices is only permitted after instruction by the customer company.
At what height does it become dangerous?
In 2019, 8,000 crashes were registered, 29 of them fatal. Most people associate crashes with work on unsecured scaffolding or high-rise buildings. But it doesn't have to go that high to become dangerous. Often the falls simply happen from stairs and ladders. A set of rules and regulations from the employer's liability insurance association therefore stipulates the implementation of various security measures at certain levels. This set of rules also applies to securing workplaces at heights of less than one meter, for example if there is water or other liquids in the work area where you can sink.Safe in height
For example, ladders can be used for work at low heights. However, these may only be used for short-term work. With correct assembly, scaffolds are safer, on which workers have a firm footing and all-round fall protection. If it is not possible to carry out the work from a scaffold, protective measures such as safety harnesses must be used.Facade lifts or aerial work platforms are often used for work on external facades. Various work can be carried out quickly and without the risk of falling. However, the use of such devices is only permitted after instruction by the customer company.
Occupational health care
In some cases, occupational health care may be necessary if work is carried out with a risk of falling. Such a precaution is recommended if the employee cannot be secured by side protection or safety harnesses at work. If this is the case, it can make sense to have the employee's medical suitability for this activity.Trust is good, control is better
Especially when working at low heights, the question often arises as to whether safety measures can be dispensed with and instead the skills of experienced workers can be trusted. Basically, a waiver of technical measures to protect against falls means that the safety of the employee depends only on his ideal behavior. Even the smallest of errors can lead to a crash. It is therefore sensible to apply a staggered concept of measures to protect workers at height.wtorek, 14 stycznia 2020
Offshore rope access
Maintenance, revision and assembly work on offshore wind turbines and transformers will also pose new challenges for people and materials in 2020. Conventional access methods often fail to achieve the desired goal. Rigid structures such as scaffolding are always exposed to the environment without protection. Industrial climbers can ensure the functionality and corrosion protection of the systems. The personnel assignments of the height workers enable a particularly flexible and cost-effective way of working.
The term offshore describes industrial plants such as wind farms, oil platforms or ships that are not onshore (on the mainland). Industrial climbers can be used wherever access is not possible without technical means.
When it comes to personnel deployment on wind turbines, for example, industrial climbers are flexible and efficient specialists for the maintenance or revision of rotor blades or hubs.
The wear of the rotor blade and other important elements of wind turbines, which is favored by wind and weather, requires effective corrosion protection in order to maintain the safety and functionality of the technology. By climbing the rope, all necessary corrosion protection treatment work can be carried out, guaranteeing protection for up to 25 years.
In addition to climbing for maintenance, repair and corrosion protection reasons, industrial climbers are also used in the field of wind turbines in the area of height rescue. This is so important because there are usually only two service technicians on the system in the normal operating phase. In the event of an accident, only industrial climbers with training in height rescue are able to rescue people from hard-to-reach parts of the wind turbines, such as the rotor blades.
The requirements for working at heights in the field of wind energy generation on the open sea are many times more complex than onshore projects. These jobs require professional training based on national and international standards.
The term offshore describes industrial plants such as wind farms, oil platforms or ships that are not onshore (on the mainland). Industrial climbers can be used wherever access is not possible without technical means.
When it comes to personnel deployment on wind turbines, for example, industrial climbers are flexible and efficient specialists for the maintenance or revision of rotor blades or hubs.
The wear of the rotor blade and other important elements of wind turbines, which is favored by wind and weather, requires effective corrosion protection in order to maintain the safety and functionality of the technology. By climbing the rope, all necessary corrosion protection treatment work can be carried out, guaranteeing protection for up to 25 years.
Industrial climber wind turbines
In addition to climbing for maintenance, repair and corrosion protection reasons, industrial climbers are also used in the field of wind turbines in the area of height rescue. This is so important because there are usually only two service technicians on the system in the normal operating phase. In the event of an accident, only industrial climbers with training in height rescue are able to rescue people from hard-to-reach parts of the wind turbines, such as the rotor blades.
The requirements for working at heights in the field of wind energy generation on the open sea are many times more complex than onshore projects. These jobs require professional training based on national and international standards.
piątek, 10 stycznia 2020
Rope access technology - history and current methods
The term rope access and positioning technology (in short: SZP) has become known under various names such as industrial climbing, working at heights or climbing facades. The term rope access has established itself internationally. All of these terms are one and the same: it is a job positioning that is achieved with the help of at least one scheduled work rope and the additional use of a second, unloaded safety rope. The development of rope access technology dates back to the 1930s. When building the Golden Gate Bridge, rope protection was used for the first time as a means of securing against falling.
The use of rope access technology has become a solid alternative to conventional access methods such as aerial work platforms or facade scaffolding in recent years. The reasons for this lie both in the fast and flexible usability of the industrial climbers and in the cost savings for the client. Rental and installation costs for conventional access aids are eliminated, restrictions for the environment caused by scaffolding or lifting platforms can be avoided, and coordination with an additional supplier is eliminated.
Typical work and locations for workers at heights are inspection, repairs and cleaning of wind turbines, facades, towers, silos and production and storage halls.
Industrial climbers work using the rope access and positioning technology. The basis for this is a redundant system, which consists of two ropes, one speaks here of the support rope (support system) and the safety rope (safety system). The support rope is permanently loaded by the positioning activity of the fitter. The safety rope is permanently unloaded and acts as redundancy in the event of a failing suspension rope.
Commercial height workers learn rope access technology in specialist training courses. These are divided into multi-level qualification levels and generally last 5 days per level including a final exam in theory and practice. Further information can be found, for example, at:
The equipment used by the industrial climbers consists of standardized individual components that must be checked annually by a specialist and listed in writing in a test report.
Before the actual execution of the work begins, preparatory work has to be done. The supervising height worker is responsible for safety on the construction site. After inspecting the workplace, he creates an object-related risk assessment. The site-specific hazards are listed here. These can be dangers from access, dangers from work itself or dangers from the environment. After appropriate measures to avoid the dangers have been developed and defined, the object-related operating instructions are drawn up. Basic instructions for the fitters are listed here, starting with the access routes to the site, the selection of the attachment points, up to the planning of the escape route and what to do in an emergency.
The use of rope access technology has become a solid alternative to conventional access methods such as aerial work platforms or facade scaffolding in recent years. The reasons for this lie both in the fast and flexible usability of the industrial climbers and in the cost savings for the client. Rental and installation costs for conventional access aids are eliminated, restrictions for the environment caused by scaffolding or lifting platforms can be avoided, and coordination with an additional supplier is eliminated.
Typical work and locations for workers at heights are inspection, repairs and cleaning of wind turbines, facades, towers, silos and production and storage halls.
Industrial climbers work using the rope access and positioning technology. The basis for this is a redundant system, which consists of two ropes, one speaks here of the support rope (support system) and the safety rope (safety system). The support rope is permanently loaded by the positioning activity of the fitter. The safety rope is permanently unloaded and acts as redundancy in the event of a failing suspension rope.
Commercial height workers learn rope access technology in specialist training courses. These are divided into multi-level qualification levels and generally last 5 days per level including a final exam in theory and practice. Further information can be found, for example, at:
The equipment used by the industrial climbers consists of standardized individual components that must be checked annually by a specialist and listed in writing in a test report.
Before the actual execution of the work begins, preparatory work has to be done. The supervising height worker is responsible for safety on the construction site. After inspecting the workplace, he creates an object-related risk assessment. The site-specific hazards are listed here. These can be dangers from access, dangers from work itself or dangers from the environment. After appropriate measures to avoid the dangers have been developed and defined, the object-related operating instructions are drawn up. Basic instructions for the fitters are listed here, starting with the access routes to the site, the selection of the attachment points, up to the planning of the escape route and what to do in an emergency.
poniedziałek, 18 listopada 2019
Work at height - offshore and industrial
Performing height work professionally and cost-effectively
Industrial Climbing is a safe and certified work process that serves workplace positioning. The goal is to perform high-altitude, deep and plant work cost-effectively (without a scaffold) or even to allow.Industrial climbing: approach
In many ways, the techniques of industrial climbers are similar to those of speleology, that is caving. This is often the abseiling from above. Also, industrial climbers do not plan a fall into the rope, as mountaineers have to calculate. They secure themselves extensively. The equipment for industrial climbing includes the kernmantel rope according to EN 1891 and the additional accompanying fishing gear according to EN 353-2. The safeguards are legally standardized.Where is industrial climbing used?
There are very many scenarios in which this form of access to the workplace is either alternative or cost-effective enough to be used exclusively. On some facades of buildings, in industrial plants (for example in power plant boilers) and in wind turbines primarily in the offshore area, it is impossible to erect scaffolding. The areas of application include wind turbines, high-rise and bridge construction, steel construction work, work on oil rigs, roof and façade repairs, chimney renovation, the installation of lightning protection and pigeon defense systems as well as maintenance work on tall buildings and facilities. In most cases, industrial climbing is also required for technical inspections and expertise; scaffolding would be far too expensive for this purpose.Industrial climbers are people who do rope work on the rope. The range of industrial climbing is extremely comprehensive and versatile, they are used, among other things, for the inspection of towers and chimneys, special installations, facade inspection, expert reports, renovation work, industrial and facade cleaning, material testing, concrete restoration and much more. Furthermore, services, wind turbines, dams and mobile communications systems are among the tasks of industrial climbers. An advantage of using industrial climbing is that it eliminates the need for scaffolding. In this way not only time, but also costs can be minimized. Ordering industrial climbing is a cost-effective and highly effective way to have high-altitude work done. The contractors of industrial climbing include builders as well as steel and façade construction companies.
For added safety, protective nets / safety nets provided by industrial climbers, e.g. be mounted on steel structures. Surface cross-linking and edge fall protection are carried out in accordance with BGR 179 and BGI 810. With industrial climbing, work at high altitudes is largely problem-free. DAAS Group specializes in the construction of equipment for alpine engineering within the construction industry and offers top-quality services. Due to the use of industrial climbing, traffic areas are only minimally restricted. For all questions concerning the offer of the DAAS Group where all the employees of the company are happy to be at your disposal and will find exactly the right solution for the respective project together with the customer.
Subskrybuj:
Posty (Atom)



